Toshiba e-STUDIO520 Service Handbook page 268

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO520:
Table of Contents

Advertisement

* When using the setting code 08-841 to improve the image quality, increase the value by one and
check the result. If the result is not sufficient, repeat the same procedure.
(The transfer ability for the paper leading edge shows a tendency as shown in the table below.)
* The transfer ability for the paper leading edge and the paper separation ability from the photo-con-
ductive drum are inversely related as shown in the table below.
Therefore, if the value is increased too much, this may cause the slight decrease of the paper sepa-
ration ability from the photo-conductive drum. So, when adjusting the value, be sure to check the
paper feeding as well as the image quality.
[Setting code 08-841: Transfer timing correction]
Value
e-STUDIO520/523/600/603/
720/723
0
Approx. 1.4 mm slower than the
standard ON timing
1
Same as the standard ON tim-
ing.
(Default value)
2
Approx. 1.4 mm faster than the
standard ON timing
3
Approx. 2.8 mm faster than the
standard ON timing.
4
Approx. 7.1 mm faster than the
standard ON timing.
e-STUDIO520/523/600/603/720/723/850/853
ADJUSTMENT
Content
e-STUDIO850/853
Approx. 1.6 mm slower than the
standard ON timing
Same as the standard ON tim-
ing.
(Default value)
Approx. 1.6 mm faster than the
standard ON timing.
Approx. 3.3 mm faster than the
standard ON timing.
Approx. 8.2 mm faster than the
standard ON timing.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
3 - 36
07/11
Paper separa-
Transfer abil-
tion ability from
ity for paper
the photo-con-
leading edge
ductive drum
|
Separation abil-
|
ity improves
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transfer ability
|
improves
|

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents