Toshiba e-STUDIO520 Service Handbook page 516

[B] Print out the "FUNCTION LIST FOR MAINTENANCE" (content of Function Mode (13) setting) list.
(1) Press the [USER FUNCTIONS] button and then the [USER] button.
(2) Press the [LIST] button.
(3) Key in [*] [#] [*] [*] [3] [3] and then press the [START] button.
[C] Print out the "FUNCTION" list.
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
(3) Press the [LIST/REPORT] button and then the [LIST] button.
(4) Press the [FUNCTION] button.
[D] Replace the HDD.
[E] Update of HDD program data and UI data.
(1) Create partitions. (In case of using the download jig, this is not necessary.)
While pressing [3] and [CLEAR] button, turn the power ON.
When "Firmware Version Up Mode" appears on the LCD, key in [3] and press the [START] but-
ton.
(2) Update with the download jig or USB storage.
See P.6-1 "6. FIRMWARE UPDATING" for details.
(3) Format the HDD. (Setting Mode (08-690: 2))
* When the FAX unit (GD-1150) is installed.
Start up with the FAX Clearing Mode (1*)
Perform the 1*-100 (FAX Set Up), 1*-102 (Clearing the image data) of the FAX Clearing
Mode.
[F] Ask users to reset the user's setting items and to restore the data/information. See the following
for the reset and the restore.
(1) Printer driver
Upload them in the "Administrator" menu of TopAccess.
(2) F-code information, Template registering information, Address book
Restore them in the "Administrator" menu of TopAccess
(3) Department management data
Import them in the "Administrator" menu of TopAccess.
e-STUDIO520/523/600/603/720/723/850/853
TROUBLESHOOTING
The list is outputted.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
5 - 154
05/04
The list is outputted.