Toshiba e-STUDIO520 Service Handbook page 270

[B] Adjusting carriages-1 and -2 positions
<Procedure>
(1) Move the carriage-2 toward the exit side.
(2) Loosen the screws fixing the front side pulley bracket, make the sections A and B of the carriage-
2 touch with the inside of the exit side frame and screw them up.
[ Rear ]
(3) Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit
side frame and screw up the front/rear sides of the bracket to fix it.
Note: Note:
Make sure that the sections A and B of the carriage-2 touch with the exit side frame.
[ Rear ]
e-STUDIO520/523/600/603/720/723/850/853
ADJUSTMENT
Carriage-2
B
Carriage-1
Bracket
D
Pulley bracket
A
Fig. 3-29
Bracket
C
Fig. 3-30
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
3 - 38
[ Front ]
Exit side frame
[ Front ]
Exit side frame