(3)
After winding the wires around the pulleys, attach the wire holder jigs not to loosen the wires.
Notes:
•
When the wire holder jig is attached, make sure that the wire is not shifted or loosened.
•
The wire should come out of the slot of the wire holder jig and be passed through between the
arm and the jig.
e-STUDIO520/523/600/603/720/723/850/853
ADJUSTMENT
Wire holder jig
Arm
Fig. 3-32
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
3 - 40