Toshiba e-STUDIO520 Service Handbook page 103

Notes:
• The digit after the hyphen in "Code" of the following table is a sub code.
• In "RAM", the NVRAM or FRAM of the board in which the data of each code is stored is indi-
cated. "M" stands for the LGC board, "SYS" and "UTY" stands for the SYS board.
Classifi-
Code
cation
200 General Date and time setting
201 General Destination selection
202 User Counter installed externally
interface
203 General Line adjustment mode
204 User Auto-clear timer setting
interface
205 User Auto power save mode
interface timer setting
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Setting mode (08)
Default
Func- <Accept-
Items
tion
value>
ALL
<13 dig-
ALL EUR: 0
ALL
ALL
ALL
<0-10>
ALL
<0, 6-15>
2 - 77
07/05
RAM Contents
able
- - Year/month/date/day/
hour/minute/second
its> Example:
03 07 0 13 13 27 48
"Day" - "0" is for
"Sunday". Pro-
ceeds Monday
through Saturday
from "1" to "6".
M 0: EUR
UC: 1 1: UC
JPN: 2 2: JPN
<0-2>
0 M 0: No external counter
<0-3> 1: Coin controller
2: Copy key card
(This value is valid
only when "2" is set
to 08-201.)
3: Key copy counter
0 M 0: For factory shipment
<0-1> 1: For line
* Field: "0" must be
selected
3 SYS Timer to return the
equipment to the
default settings when
the [START] button is
not pressed after the
function and the mode
are set
0: Not cleared
1 to 10: Set number x
15 sec.
11 SYS Timer to automatically
switch to the Auto
power save mode when
the equipment has not
been used
0: Invalid
7: 4min.
9: 7min.
10: 10min.
11: 15min.
12: 20min.
13: 30min.
14: 45min.
15: 60min.
e-STUDIO520/523/600/603/720/723/850/853
ERROR CODE AND SELF-DIAGNOSTIC MODE
Proce-
dure
5
1
1
1
1
1
6: 3min.
8: 5min.
2