Toshiba e-STUDIO520 Service Handbook page 641

<SRAM Data Restore>
(18) Connect the USB storage device to the USB connector (host) on the SYS board.
(19) Turn the power ON while pressing the [5] and [9] button simultaneously.
The screen to select the backup/restore items is displayed.
Notes:
• After the item is selected with the digital keys, displaying the next menu may take a long time.
• When "Disable" is set for the [Data Cloning Function] in TopAccess, the following screen is
displayed. Contact and ask the administrator to change the setting on TopAccess.
(20) Press the [6] button.
The screen to select the SRAM data restore item is displayed. In this screen, the item to be
restored is shown after the mark "*". (The item is not selected in the screen by default.)
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-30
Fig. 9-31
Fig. 9-32
e-STUDIO520/523/600/603/720/723/850/853
DATA CLONING with USB STORAGE DEVICE
9 - 21
07/11
9