Toshiba e-STUDIO520 Service Handbook page 415

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO520:
Table of Contents

Advertisement

[EC20] Inserter reverse path delay jam-1
[EC30] Inserter reverse path stop jam-1
[EC40] Inserter reverse path delay jam-2
[EC50] Inserter reverse path stop jam-2
Are the transport roller and reverse roller tainted?
YES
NO
Is the harness between the inserter control board and reverse path sensor is open-cir-
cuited?
YES
NO
Is the reverse path sensor working improperly?
YES
NO
Replace the inserter control board.
[EC60] Inserter transport delay jam-1
[EC70] Inserter transport stop jam-1
[EC80] Inserter transport delay jam-2
[EC90] Inserter transport stop jam-2
Is the transport roller tainted?
YES
NO
Is the harness between the inserter control board and transport sensor is open-circuited?
YES
NO
Is the transport sensor working impropely?
YES
NO
Replace the inserter control board.
© 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved
Clean up the rollers.
Replace the harness.
Replace the reverse path sensor.
Clean up the roller.
Replace the harness.
Replace the transport sensor.
5 - 53
e-STUDIO520/523/600/603/720/723/850/853
TROUBLESHOOTING
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents