Lldp Transmit; Lldp Snmp-Trap - TP-Link T1600-28TS Cli Reference Manual

30.5 lldp transmit

Description
The lldp transmit command is used to enable the designated port to transmit
LLDPDU. To disable the function, please use no lldp transmit command.
Syntax
lldp transmit
no lldp transmit
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enable Gigabit Ethernet port 1/0/1 to transmit LLDPDU:
T1600G-52TS(config)# interface gigabitEthernet 1/0/1
T1600G-52TS(config-if)#lldp transmit

30.6 lldp snmp-trap

Description
The lldp snmp-trap command is used to enable the port's SNMP notification.
If enabled, the port will notify the trap event to network management system.
To disable the ports' SNMP notification, please use no lldp snmp-trap
command.
Syntax
lldp snmp-trap
no lldp snmp-trap
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
300