1.1.4 Logon By Ssh - TP-Link TL-SG3210 Cli Reference Manual

3. You are prompted to enter the connection password 456 you have set through Console port
connection, and then you are in User EXEC Mode.
Type enable command to enter Privileged EXEC Mode.
4.
Now you can manage your switch with CLI commands through Telnet connection.
Note:
You can refer to Chapter 9 User Manage Commands
Telnet connection configuration.

1.1.4 Logon by SSH

To log on by SSH, a Putty client software is recommended. There are two authentication modes to
set up an SSH connection:
Password Authentication Mode: It requires username and password, which are both admin by
default.
Key Authentication Mode: It requires a public key for the switch and a private key for the SSH
client software. You can generate the public key and the private key through Putty Key Generator.
Note:
Before SSH login, please follow the steps shown in Figure 1-13 to enable the SSH function through
Telnet connection.
Figure 1-11 Enter into the User EXEC Mode
Figure 1-12 Enter into the Privileged EXEC Mode
for detailed commands information of the
9