System-Time Dst Recurring - TP-Link TL-SG3210 Cli Reference Manual

system-time dst recurring

Description
The system-time dst recurring command is used to specify the DST
configuration in recurring mode. This configuration is recurring in use. The time
period is restricted to be within one year.
Syntax
system-time dst recurring { sweek } { sday } { smonth } { stime } { eweek }
{ eday } { emonth } { etime } [ offset ]
Parameter
sweek —— Week to start, with the options: first, second, third, fourth, last.
sday —— Day to start, with the options: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
smonth—— Month to start, with options: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug,
Sep, Oct, Nov, Dec.
stime —— Time to start, in the format of: hh:mm.
eweek —— Week to end, with options: first, second, third, fourth, last.
eday —— Day to end, with options: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
emonth —— Month to end, with options: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug,
Sep, Oct, Nov, Dec.
etime —— Time to end, in the format of: hh:mm.
offset —— Specify the time adding in minutes when Daylight Saving Time comes.
The range of value depends and the default value is 60 minutes. It is optional.
Command Mode
Global Configuration Mode
Example
Specify the DST start time of the switch as 2:00 am on the first Sunday in May,
the end time as 2:00 am on the last Sunday in October and the offset as 45
minutes:
TL-SG3424(config)# system-time dst recurring first Sun May 02:00 last Sun
Oct 02:00 45
118