Ip Dhcp Snooping Information Circuit-Id - TP-Link T1600-28TS Cli Reference Manual

Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the customized sub-option Remote ID for the Option 82 as tplink
on port 1/0/1:
T1600G-52TS(config)#interface gigabitEthernet 1/0/1
T1600G-52TS(config-if)#ip dhcp snooping information remote-id tplink

10.7 ip dhcp snooping information circuit-id

Description
The ip dhcp snooping information circuit-id command is used to enable and
configure the customized sub-option Circuit ID for the Option 82 on a
specified port/port channel. To return to the default Circuit ID for the Option
82, please use no ip dhcp snooping information circuit-id command.
Syntax
ip dhcp snooping information circuit-id
no ip dhcp snooping information circuit-id
Parameter
string
most.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
—— Enter the sub-option Circuit ID, which contains 64 characters at
string
71