Cisco Nexus 5500 Series Command Reference Manual page 156

remote vrf
remote vrf
To configure the virtual routing and forwarding (VRF) instance for the remote machine, use the remote
vrf command.
Syntax Description vrf-name
default
management
Command Default None
Command Modes SVS connection configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the VRF of a remote machine:
switch# configure terminal
switch(config)# svs connection SVSConn
switch(config-svs-conn)# remote vrf default
switch(config-svs-conn)#
Related Commands Command
remote hostname
remote ip address
remote port
show svs connections
svs connection
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1150
remote vrf {vrf-name | default | management}
VRF name. The name is case sensitive and can be a maximum of 32
characters.
Specifies the default VRF.
Specifies the management VRF.
Modification
This command was introduced.
Description
Configures the hostname for a remote machine.
Configures the IPv4 address for a remote machine.
Configures the TCP port of a remote machine.
Displays SVS connection information.
Enables an SVS connection.
Chapter R Commands
OL-27880-02