Cisco Nexus 5500 Series Command Reference Manual page 374

show running-config spanning-tree
show running-config spanning-tree
To display the running configuration for the Spanning Tree Protocol (STP), use the show
running-config spanning-tree command.
Syntax Description all
Command Default
None
Command Modes
EXEC mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to display information on the running STP configuration:
switch# show running-config spanning-tree
This example shows how to display detailed information on the running STP configuration:
switch# show running-config spanning-tree all
Display output differs slightly depending on whether you are running Rapid Per VLAN Spanning Tree
Note
Plus (Rapid PVST+) or Multiple Spanning Tree (MST).
This example shows how to display information on the running STP configuration, including the
spanning tree pseudo information:
switch# show running-config spanning-tree
spanning-tree domain 1
spanning-tree pseudo-information
mst 1 root priority 4096
mst 2 designated priority 4096
interface port-channel1
spanning-tree port type network
switch#
Related Commands Command
show spanning-tree
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1368
show running-config spanning-tree [all]
(Optional) Displays current STP operating information including default
settings.
Modification
This command was introduced.
Description
Displays information about STP.
Chapter Show Commands
OL-27880-02