Cisco Nexus 5500 Series Command Reference Manual page 274

show cdp entry
System Name: switch
Interface address(es):
Platform: N6K-C6004-96Q, Capabilities: Switch IGMP Filtering Supports-STP-Disput
e
Interface: Ethernet1/12, Port ID (outgoing port): Ethernet1/4
Holdtime: 125 sec
Version:
Cisco Nexus Operating System (NX-OS) Software, Version 6.0(2)N1(1)
Advertisement Version: 2
Native VLAN: 1
Duplex: full
MTU: 1500
Physical Location: snmplocation
Mgmt address(es):
switch#
This example shows how to display a specific entry from the CDP database:
switch# show cdp entry name swor95(SSI13110AAS)
----------------------------------------
Device ID:swor95(SSI13110AAS)
System Name:swor95
Interface address(es):
Platform: N5K-C5010P-BF, Capabilities: Switch IGMP Filtering Supports-STP-Dispute
Interface: Ethernet1/29, Port ID (outgoing port): Ethernet1/19
Holdtime: 173 sec
Version:
Cisco Nexus Operating System (NX-OS) Software, Version 6.0(2)N1(1)
Advertisement Version: 2
Native VLAN: 1
Duplex: full
Physical Location: snmplocation
Mgmt address(es):
switch#
Related Commands Command
cdp
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1268
IPv4 Address: 192.0.2.192
IPv4 Address: 192.0.2.192
IPv4 Address: 192.0.2.95
IPv4 Address: 192.0.2.95
Description
Enables CDP on the switch.
Chapter Show Commands
OL-27880-02