Cisco Nexus 5500 Series Command Reference Manual page 426

show vtp counters
show vtp counters
To display the VLAN Trunking Protocol (VTP) statistics, use the show vtp counters command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
Before you use this command, you must enable VTP on the switch by using the feature vtp command.
Examples This example shows how to display the VTP counters:
switch# show vtp counters
VTP statistics:
Summary advertisements received
Subset advertisements received
Request advertisements received
Summary advertisements transmitted : 0
Subset advertisements transmitted
Request advertisements transmitted : 0
Number of config revision errors
Number of config digest errors
Number of V1 summary errors
VTP pruning statistics:
Trunk
---------------- ---------------- ---------------- ---------------------------
port-channel23
port-channel67
port-channel400
port-channel1504
Ethernet1/2
Ethernet1/12
switch#
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1420
show vtp counters
Modification
This command was introduced.
Join Transmitted Join Received
0
0
0
0
0
0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
Summary advts received from
non-pruning-capable device
0 0
0 0
0 0
0 0
0 0
0 0
Chapter Show Commands
OL-27880-02