Cisco Nexus 5500 Series Command Reference Manual page 408

show startup-config vtp
show startup-config vtp
To display the VLAN Trunking Protocol (VTP) configuration from the startup configuration file, use the
show startup-config vtp command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to display the VTP configuration stored in the startup configuration file:
switch# show startup-config vtp
!Command: show startup-config vtp
!Time: Wed Jan 30 08:45:33 2013
!Startup config saved at: Wed Jan 30 08:45:03 2013
version 6.0(2)N1(1)
feature vtp
vtp mode transparent
vtp domain MyDomain
vtp file bootflash:/myvtp.txt
switch#
Related Commands Command
copy running-config
startup-config
feature vtp
vtp domain
vtp file
vtp mode
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1402
show startup-config vtp
Modification
This command was introduced.
Description
Copies the running configuration to the startup configuration file.
Enables VTP on the switch.
Configures the VTP administrative domain.
Stores the VTP configuration in a file.
Configures a VTP device mode.
Chapter Show Commands
OL-27880-02