Cisco Nexus 5500 Series Command Reference Manual page 318

show interface virtual
show interface virtual
To display the status of all virtual interfaces, use the show interface virtual command.
Syntax Description status
summary
adapter-fex
bound interface
ethernet
slot/[QSFP-module/]port
vm-fex
Command Default
None
Command Modes EXEC mode
Command History Release
6.0(2)N1(1)
5.2(1)N1(1)
Usage Guidelines Before you use this command, make sure that you enable Cisco Virtual Machine Fabric Extender
(VM-FEX) on the switch by using the feature vmfex command.
Examples This example shows how to display brief information about the counters configured on a specified virtual
Ethernet interface:
switch# show interface virtual status
Interface VIF-index
-------------------------------------------------------------------------
Total 1 Veth interfaces
switch#
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1312
show interface virtual {{status | summary} [adapter-fex | bound interface ethernet
slot/[QSFP-module/]port | vm-fex]}
Modification
Support for the QSFP+ GEM was added.
This command was introduced.
Bound If
Displays the status of all virtual Ethernet interfaces (vEth) and floating
virtual interfaces.
Displays the summary information about virtual Ethernet interfaces.
(Optional) Displays information about fixed virtual ethernet interfaces.
(Optional) Displays information about virtual interfaces on a bound
interface.
(Optional) Displays information about a specific ethernet interface.The
slot number is from 1 to 255. The QSFP-module number is from 1 to
4. The port number is from 1 to 128.
The QSFP-module number applies only to the QSFP+ Generic
Note
Expansion Module (GEM).
(Optional) Displays information about all floating virtual interfaces.
Chan Vlan Status
Chapter Show Commands
Mode Vntag
OL-27880-02