Cisco Nexus 5500 Series Command Reference Manual page 330

show mac address-table notification
show mac address-table notification
To display notifications about the MAC address table, use the show mac address-table notification
command.
Syntax Description mac-move
threshold
Command Default
None
Command Modes EXEC mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to display MAC address move notifications:
switch# show mac address-table notification mac-move
MAC Move Notify : disabled
switch#
Related Commands Command
show mac
address-table
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1324
show mac address-table notification {mac-move | threshold}
Displays notification messages about MAC addresses that were moved.
Displays notification messages sent when the MAC address table threshold
was exceeded.
Modification
This command was introduced.
Description
Displays information about the MAC address table.
Chapter Show Commands
OL-27880-02