Cisco Nexus 5500 Series Command Reference Manual page 279

Chapter Show Commands
Version:
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(50)SE2,
RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 15-May-09 22:11 by nachen
Advertisement Version: 2
Native VLAN: 88
VTP Management Domain:
Duplex: full
Mgmt address(es):
IPv4 Address: 192.0.2.70
switch#
This example shows how to display the detailed information of all CDP neighbors:
switch# show cdp neighbors detail
----------------------------------------
Device ID:sw-sw70
VTP Management Domain Name:
Interface address(es):
IPv4 Address: 192.0.2.70
Platform: WS-C3560E-48T, Capabilities: Switch IGMP Filtering
Interface: mgmt0, Port ID (outgoing port): GigabitEthernet0/30
Holdtime: 151 sec
Version:
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 12.2(50)SE2, RELEASE
SOFTWARE (fc2)
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Fri 15-May-09 22:11 by nachen
Advertisement Version: 2
Native VLAN: 88
Duplex: full
Mgmt address(es):
IPv4 Address: 192.0.2.70
----------------------------------------
Device ID:switch(FOC16333ZER)
System Name: switch
Interface address(es):
IPv4 Address: 192.0.2.192
Platform: N6K-C6004-96Q, Capabilities: Switch IGMP Filtering Supports-STP-Dispute
Interface: Ethernet1/4, Port ID (outgoing port): Ethernet1/12
Holdtime: 174 sec
Version:
Cisco Nexus Operating System (NX-OS) Software, Version 6.0(2)N1(1)
Advertisement Version: 2
Native VLAN: 1
Duplex: full
MTU: 1500
Physical Location: snmplocation
Mgmt address(es):
IPv4 Address: 192.0.2.192
----------------------------------------
OL-27880-02
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
show cdp neighbors
1273