Cisco Nexus 5500 Series Command Reference Manual page 93

Chapter I Commands
ip igmp snooping (EXEC)
To enable Internet Group Management Protocol (IGMP), use the ip igmp snooping command. To
disable IGMP snooping, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default IGMP snooping is enabled.
If the global setting is disabled, then all VLANs are treated as disabled, whether they are enabled or not.
Note
Command Modes EXEC mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to enable IGMP snooping:
switch# ip igmp snooping
Related Commands Command
show ip igmp snooping Displays IGMP snooping information and configuration.
OL-27880-02
ip igmp snooping
no ip igmp snooping
Modification
This command was introduced.
Description
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
ip igmp snooping (EXEC)
187