Cisco Nexus 5500 Series Command Reference Manual page 351

Chapter Show Commands
show port-channel summary
To display summary information about EtherChannels, use the show port-channel summary command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes Global configuration mode
EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
Before you use this command, you must configure an EtherChannel group using the interface
port-channel command.
Examples
This example shows how to display summary information about EtherChannels:
switch# show port-channel summary
Flags:
--------------------------------------------------------------------------------
Group Port-
--------------------------------------------------------------------------------
1
3
5
6
12
15
20
24
(P)
OL-27880-02
show port-channel summary
Modification
This command was introduced.
D - Down P - Up in port-channel (members)
I - Individual H - Hot-standby (LACP only)
s - Suspended r - Module-removed
S - Switched R - Routed
U - Up (port-channel)
Type
Channel
Po1(SU) Eth
Po3(SU) Eth
Po5(SU) Eth
Po6(SU) Eth
Po12(SU) Eth
Po15(SD) Eth
Po20(SU) Eth
Po24(SU) Eth
Protocol Member Ports
LACP Eth1/1(P)
Eth1/4(P)
Eth1/23(P)
Eth1/26(P)
Eth1/29(P)
Eth1/32(P)
NONE Eth1/9(P)
Eth1/14(P)
NONE Eth3/5(P)
NONE Eth1/5(P)
Eth1/8(P)
NONE Eth3/3(P)
NONE --
NONE Eth1/17(P)
Eth1/20(P)
LACP Eth105/1/27(P)
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
show port-channel summary
Eth1/2(P) Eth1/3(P)
Eth1/21(P) Eth1/22(P)
Eth1/24(P) Eth1/25(P)
Eth1/27(P) Eth1/28(P)
Eth1/30(P) Eth1/31(P)
Eth1/10(P) Eth1/13(P)
Eth1/40(P)
Eth3/6(P)
Eth1/6(P) Eth1/7(P)
Eth3/4(P)
Eth1/18(P) Eth1/19(D)
Eth105/1/28(P) Eth105/1/29
1345