Cisco Nexus 5500 Series Command Reference Manual page 372

show running-config port-security
show running-config port-security
To display the running system configuration information about secure ports, use the show
running-config port-security command.
Syntax Description all
Command Default
None
Command Modes
EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the running system configuration of all secure ports on an interface:
switch# show running-config port-security
!Command: show running-config port-security
!Time: Mon Jan 30 00:37:27 2013
version 6.0(2)N1(1)
feature port-security
interface Ethernet1/5
switchport port-security
switchport port-security aging time 3
switchport port-security maximum 10
switchport port-security mac-address sticky
switch#
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1366
show running-config port-security [all]
(Optional) Displays detailed information about secure ports, including
default settings.
Modification
This command was introduced.
Chapter Show Commands
OL-27880-02