Cisco Nexus 5500 Series Command Reference Manual page 58

extension-key
extension-key
To configure the extension key to be used to connect to the vCenter Server, use the extension-key
command.
Syntax Description extn-ID
Command Default
None
Command Modes SVS connection configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to configure the extension key for a vCenter Server:
switch# configure terminal
switch(config)# svs connection SVSConn
switch(config-svs-conn)# extension-key vckey
switch(config-svs-conn)#
Related Commands Command
show svs connections
svs connection
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
152
extension-key extn-ID
Extension ID. The ID can be a maximum of 80 alphanumeric characters.
Modification
This command was introduced.
Description
Displays SVS connection information.
Enables an SVS connection.
Chapter E Commands
OL-27880-02