Cisco Nexus 5500 Series Command Reference Manual page 375

Chapter Show Commands
show running-config vlan
To display the running configuration for a specified VLAN, use the show running-config vlan
command.
Syntax Description vlan-id
Command Default
None
Command Modes EXEC mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
This command provides information on the specified VLAN, including private VLANs.
The display varies with your configuration. If you have configured the VLAN name, shutdown status, or
suspended status, these are also displayed.
Examples This example shows how to display the running configuration for VLAN 5:
switch# show running-config vlan 5
Related Commands Command
show vlan
OL-27880-02
show running-config vlan vlan-id
Number of VLAN or range of VLANs. Valid numbers are from 1 to 4096.
Modification
This command was introduced.
Description
Displays information about all the VLANs on the switch.
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
show running-config vlan
1369