Cisco Nexus 5500 Series Command Reference Manual page 178

spanning-tree domain
spanning-tree domain
To configure a Spanning Tree Protocol (STP) domain, use the spanning-tree domain command. To
remove an STP domain, use the no form of this command.
Syntax Description
domain-num
Command Default None
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to configure a spanning-tree domain:
switch# configure terminal
switch(config)# spanning-tree domain 1
switch(config)#
Related Commands Command
show spanning-tree
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1172
spanning-tree domain domain-num
no spanning-tree domain domain-num
STP domain number. The range is from 1 to 1023.
Modification
This command was introduced.
Description
Displays the configuration information of the Spanning Tree Protocol
(STP).
Chapter S Commands
OL-27880-02