Cisco Nexus 5500 Series Command Reference Manual page 38

default shutdown (virtual Ethernet interface)
default shutdown (virtual Ethernet interface)
To enable default commands on a virtual Ethernet interface, use the default shutdown command.
Syntax Description
This command has no arguments or keywords.
Command Default
No description is added.
Command Modes Virtual Ethernet interface configuration
Command History Release
5.2(1)N1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to enable a virtual Ethernet interface:
switch# configure terminal
switch(config)# interface vethernet 1
switch(config-if)# default shutdown
switch(config-if)#
Related Commands Command
show interface
vethernet
show running-config
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
132
default shutdown
Modification
This command was introduced.
Description
Displays the virtual Ethernet interface configuration information.
Displays the contents of the currently running configuration file.
Chapter D Commands
OL-27880-02