feature flexlink
feature flexlink
To enable Flex Links, use the feature flexlink command. To disable Flex Links, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration mode
Command History
Release
5.2(1)N1(1)
Examples
This example shows how to enable Flex Links on the switch:
switch(config)# feature flexlink
Related Commands
Command
show feature
switchport backup
interface
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
154
feature flexlink
no feature flexlink
Modification
This command was introduced.
Description
Displays the status of features enabled or disabled on the switch.
Configures Flex Links, which are two interfaces that provide backup to each
other, on a Layer 2 interface.
Chapter
F Commands
OL-27880-02