Cisco Nexus 5500 Series Command Reference Manual page 190

spanning-tree mst max-hops
spanning-tree mst max-hops
To specify the number of possible hops in the region before a bridge protocol data unit (BPDU) is discarded,
use the spanning-tree mst max-hops command. To return to the default settings, use the no form of this
command.
Syntax Description
hop-count
Command Default
20 hops
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Examples
This example shows how to set the number of possible hops:
switch(config)# spanning-tree mst max-hops 25
Related Commands Command
show spanning-tree
mst
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1184
spanning-tree mst max-hops hop-count
no spanning-tree mst max-hops
Number of possible hops in the region before a BPDU is discarded. The range is from
1 to 255 hops.
Modification
This command was introduced.
Description
Displays the information about the MST protocol.
Chapter S Commands
OL-27880-02