Cisco Nexus 5500 Series Command Reference Manual page 79

Chapter I Commands
install feature-set virtualization
To install the Cisco virtual machine feature set on the switch, use the install feature-set virtualization
command. To remove the Cisco virtual machine feature set, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
The Cisco virtual machine feature is supported only on the Cisco Nexus 5500 Series switches.
Note
This command requires an Enhanced Layer 2 license.
Examples This example shows how to install the Cisco virtual machine feature set on the switch:
switch# configure terminal
switch(config)# install feature-set virtualization
switch(config)#
Related Commands Command
feature vmfex
feature-set
virtualization
show feature-set
show running-config
OL-27880-02
install feature-set virtualization
no install feature-set virtualization
Modification
This command was introduced.
Description
Enables or disables Cisco Virtual Machine Fabric Extender (VM-FEX) on
the switch.
Enables the Cisco virtual machine feature set on the switch.
Displays the status of the virtualization feature set.
Displays the running system configuration information.
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
install feature-set virtualization
173