Cisco Nexus 5500 Series Command Reference Manual page 312

show interface switchport backup
port-channel300
301)
port-channel500
port-channel502
port-channel504
switch#
Table 2
Table 2
Field
Active Interface
Backup Interface
State
Preemption Mode
Preemption Delay
Multicast Fast Convergence
Bandwidth
Related Commands Command
switchport backup
interface
show running-config
backup
show running-config
flexlink
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1306
port-channel301
Preemption Mode : forced
Preemption Delay : 35 seconds (default)
Multicast Fast Convergence
Bandwidth : 20000000 Kbit (port-channel300), 10000000 Kbit (port-channel
port-channel501
Preemption Mode : off
Multicast Fast Convergence
Bandwidth : 100000 Kbit (port-channel500), 100000 Kbit (port-channel501)
port-channel503
Preemption Mode : off
Multicast Fast Convergence
Bandwidth : 100000 Kbit (port-channel502), 100000 Kbit (port-channel503)
Ethernet2/1
Preemption Mode : off
Multicast Fast Convergence
Bandwidth : 100000 Kbit (port-channel504), 0 Kbit (Ethernet2/1)
describes the significant fields displayed in the output.
show interface switchport backup Field Descriptions
Description
Configures Flex Links.
Displays the running configuration information for backup interfaces.
Displays the running configuration information for Flex Links.
Active Up/Backup Down
: On
Active Down/Backup Down
: On
Active Down/Backup Down
: Off
Active Down/Backup Down
: Off
Description
Layer 2 interface being configured.
Layer 2 interface to act as a backup link to the
interface being configured.
Flex Links status.
Preemption scheme for a backup interface pair.
Preemption delay configured for a backup
interface pair.
Fast convergence configured on the backup
interface.
Bandwidth configured on the backup interface.
Chapter Show Commands
OL-27880-02