Cisco Nexus 5500 Series Command Reference Manual page 448

vmware dvs
vmware dvs
To create a VMware distributed virtual switch (DVS), use the vmware dvs command. To remove the
virtual switch, use the no form of this command.
Syntax Description
datacenter-name name VMware data centre name, including the path. The name can be a maximum
uuid dvs-uuid
Command Default
None
Command Modes
SVS connection configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to create a VMware virtual switch:
switch# configure terminal
switch(config)# svs connection SVSConn
switch(config-svs-conn)# vmware dvs datacenter-name dc1
switch(config-svs-conn)#
This example shows how to remove a VMware virtual switch:
switch# configure terminal
switch(config)# svs connection SVSConn
switch(config-svs-conn)# no vmware dvs datacenter-name dc1
switch(config-svs-conn)#
Related Commands Command
show svs connections
svs connection
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
1442
vmware dvs {datacenter-name name | uuid dvs-uuid}
no vmware dvs
of 256 characters. For example, DCName, DCFolder/DCName.
Universally Unique Identifier (UUID) of the Distributed Virtual Switch
(DVS) that the Virtual Supervisor Module (VSM) manages. The DVS UUID
must be enclosed in quotes and can be a maximum of 80 alphanumeric
characters.
Modification
This command we introduced.
Description
Displays SVS connection information.
Enables an SVS connection.
Chapter V Commands
OL-27880-02