802.1D-1998/802.1D-2004/802.1Q-2005 Compatibility; Stp Bridge Global Settings - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
802.1D-1998/802.1D-2004/802.1Q-2005 Compatibility
MSTP or RSTP can interoperate with legacy equipment and is capable of automatically adjusting BPDU packets to 802.1D-1998
format when necessary. However, any segment using 802.1D-1998 STP will not benefit from the rapid transition and rapid
topology change detection of MSTP or RSTP. The protocol also provides for a variable used for migration in the event that legacy
equipment on a segment is updated to use RSTP or MSTP.
The Spanning Tree Protocol (STP) operates on two levels:
1.
On the switch level, the settings are globally implemented.
2.
On the port level, the settings are implemented on a per-user-defined group of ports basis.
STP Bridge Global Settings
This window is used to configure the STP Bridge Global Settings on the Switch.
To view this window, click L2 Features > Spanning Tree > STP Bridge Global Settings, as shown below.
Figure 3 - 45 STP Bridge Global Settings window (RSTP - default)
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
198
Advertisement
Table of Contents
