Dhcpv6 Relay; Dhcpv6 Relay Global Settings - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
Figure 2 - 77 DHCP/BOOTP Local Relay Global Settings window
The following parameters are displayed or can be configured:
Parameter
Global State
VLAN State
VLAN Name
VID List
Click Apply to implement the changes.
DHCPv6 Relay
This section contains information for configuring DHCPv6 relay, including DHCP v6 Relay Global Settings and DHCPv6 Relay
Interface Settings.
DHCPv6 Relay Global Settings
This window is used to set up the DHCPv6 relay global status.
To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Global Settings as shown below.
The following fields can be configured:
Parameter
Global State
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Description
Use the pull-down menu to enable or disable the status.
Use the pull-down menu to enable or disable the VLAN status.
Enter the name of VLAN.
Display the VLAN list.
Figure 2 - 78 DHCPv6 Relay Global Settings window
Description
This field can be toggled between Enabled and Disabled using the pull-down menu. It is
used to enable or disable the DHCPv6 Relay service on the Switch. The default is
Disabled.
77
Advertisement
Table of Contents
