Dhcp/Bootp Local Relay Settings - D-Link xStack DGS-3400 Series Reference Manual

x Stack
To remove an entry, enter the appropriate MAC Address or String information and click Delete. To delete all entries click Clear
All. To add a new entry click Add the following window will appear.
The following parameters can be configured:
Parameter
Client ID
Relay Rule
Click Apply to implement the changes.

DHCP/BOOTP Local Relay Settings

This window is used to configure the global settings of DHCP/BOOTP local relay.
To view this window, click Administration > DHCP/BOOTP Local Relay Settings, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 75 DHCP Relay Option 61 Table window
Figure 2 - 76 DHCP Relay Option 61 Table - Add window
Description
Click the radio buttons to select the method of identification for the Client ID either MAC
Address or String. The MAC Address will specify the hardware address of the client and the
String will specify the client ID. Choose a method and enter the appropriate information into
the box provided.
Click the radio buttons to choose either Relay or Drop. When drop is specified, the packet
with no matching rules found will be dropped without further process. When relay is selected
the packet will be relayed based on the relay rules. Choose a method and enter the
appropriate information into the box provided.
76