x Stack
sFlow Global Settings
The following window is used to globally enable the sFlow feature for the Switch. Simply use the pull-down menu and click
Apply to enable or disable sFlow. This window will also display the sFlow version currently being utilized by the Switch, along
with the sFlow Address that is the Switch's IP address.
To view this window, click Administration > sFlow > sFlow Global Settings, as shown below.
The following parameters can be configured or viewed:
Parameter
sFlow State
sFlow Version
sFlow IPv4 Address
sFlow IPv6 Address
Click Apply to implement the changes.
sFlow Analyzer Settings
The following windows are used to configure the parameters for the remote sFlow Analyzer (collector) that will be used to gather
and analyze sFlow Datagrams that originate from the Switch. Users must have the proper sFlow software set on the Analyzer in
order to receive datagrams from the switch to be analyzed, and to analyze these datagrams. Users may specify up to four unique
analyzers to receive datagrams, yet the virtual port used must be unique to each entry.
To view this window, click Administration > sFlow > sFlow Analyzer Settings, as shown below.
The following fields are displayed:
Parameter
Server ID
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 136 sFlow Global Settings window
Description
This field allows you to globally enable or disable sFlow.
This displays the current sFlow version.
This displays the sFlow IPv4 address.
This displays the sFlow IPv6 address.
Figure 2 - 137 sFlow Analyzer Settings window
Description
This field denotes the ID of the Analyzer Server that has been added to the sFlow settings. Up
120