Trace Ipv6 Route - D-Link xStack DGS-3400 Series Reference Manual

x Stack
Domain Name Enter the domain name of the host.
TTL (1-60) The time to live value of the trace route request. This is the maximum number of routers the
traceroute command will cross while seeking the network path between two devices.
Port (30000-64900) The virtual port number. The port number must be above 1024.The value range is from 30000
to 64900.
Timeout (1-65535) Defines the time-out period while waiting for a response from the remote device. The user may
choose an entry between 1 and 65535 seconds.
Probe (1-9)
The probe value is the number of times the Switch will send probe packets to the next hop on
the intended traceroute path. The default is 1.
Click Start to trace the route of a packet.

Trace IPv6 Route

To view this window, click Monitoring > Trace Route > Trace IPv6 Route, as shown below.
The following parameter can be configured:
Parameter Description
Target IPv6
Enter the IP address of the computer to be traced.
Address
TTL (1-60) The time to live value of the trace route request. This is the maximum number of routers the
traceroute command will cross while seeking the network path between two devices.
Port (30000-64900) The virtual port number. The port number must be above 1024.The value range is from 30000
to 64900.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 7 - 36 Trace IPv6 Route window
401