x Stack
Click Add to reveal the following window to configure:
Figure 2 - 116 DNS Resolver Static Host Name Settings window
The following fields can be set:
Parameter
Host Name
IP Address
Click Apply to implement changes made.
DNS Resolver Dynamic Host Name Table
This window is used to display or delete entries on the DNS Resolver Dynamic Host Name Table.
To view this window, click Administration > DNS Resolver > DNS Resolver Dynamic Host Name Table, as shown below.
Figure 2 - 117 DNS Resolver Dynamic Host Name Table window
To remove an entry from the table, click its corresponding
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Description
Enter the host's host name.
Enter the host's IP address.
under the Delete heading.
103