D-Link xStack DGS-3400 Series Reference Manual page 134

x Stack
Owner
Timeout (sec)
Countdown Time
Collector Address
Collector Port
Max Datagram Size
Modify
To remove an entry, click the
display the following window to be configured:
To change an sFlow Analyzer, click the corresponding Modify button in the sFlow Analyzer Settings window that will display the
following window to be configured:
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
to four entries can be added with the same UDP port.
Displays the owner of the entry made here. The user that added this sFlow Analyzer
configured this name.
Displays the configured time, in seconds, after which the Analyzer server will time out. When
the server times out, all sFlow samples and counter polls associated with this server will be
deleted.
Displays the current time remaining before this Analyzer server times out. When the server
times out, all sFlow samples and counter polls associated with this server will be deleted.
Displays the IP address of the sFlow Analyzer Server. This IP address is where sFlow
datagrams will be sent for analysis.
Displays the previously configured UDP port where sFlow datagrams will be sent for analysis.
This field displays the maximum number of data bytes in a single sFlow datagram that will be
sent to this sFlow Analyzer Server.
Click the Modify button to display the sFlow Counter Analyzer Edit window, so that users
may edit the settings for this server.
button. To add a new sFlow Analyzer, click the Add button in the previous window that will
Figure 2 - 138 sFlow Analyzer Settings – Add window
121