Rcp Server Settings - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
Figure 2 - 49 Remote Copy Protocol between an RCP server and an Ethernet Switch
As illustrated in Figure 2 - 49, a user can:
a) Upload a configuration file from the Switch to the RCP Server.
b) Download a firmware file from the RCP Server to the Switch.
c) Upload the Log file from the Switch to the RCP Server.
d) Download the configuration file from the RCP Server to the Switch.
RCP Server Settings
This window is used to configure the global RCP server information. The global RCP Server setting can be used when the Server
or remote user name is not specified. ONLY one RCP server can be configured.
To view this window, click Administration > RCP > RCP Server Settings, as shown below.
The following parameters can be configured:
Parameter
Description
Action
Toggle the action between Add and Clear.
Type
Select to enter the information in IP Address and/or User Name fields. Available options are IP
Address, User Name and Both.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 50 RCP Server Settings window
57
Advertisement
Table of Contents
