Initialize Port(S) - D-Link xStack DGS-3400 Series Reference Manual

x Stack
Parameter
Max User (1-4000)
User Name
Password
Confirm Password
Click Apply to implement the changes. The new User will be displayed in the 802.1X User Table. To remove a user click the
corresponding button.

Initialize Port(s)

Existing 802.1X port and MAC settings are displayed and can be configured using the window below.
To view this window, click Security > 802.1X > Initialize Port(s), as shown below.
This window allows initialization of a port or group of ports. The Initialize Port Table in the bottom half of the window displays
the current status of the port(s).
To initialize ports for the MAC side of 802.1X, the user must first enable 802.1X by MAC address in the DGS-3400 Web
Management Tool window.
Click Security > 802.1X > Initialize Port(s), as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Description
Enter the maximum number of users to be allowed. Check the No Limit check box to specify
that there will be the maximum number of users. By default there is no limit.
Enter the User Name of the new profile to be created.
Enter a password for the new user.
Re-enter the password entered in the field above.
NOTE: The user must first globally enable 802.1X in the DGS-3400 Web
Management Tool window before setting up ports.
Figure 6 - 29 Initialize Port(s) window (Port-based 802.1X)
Figure 6 - 30 Initialize Port(s) window (MAC-based 802.1X)
319