D-Link xStack DGS-3400 Series Reference Manual page 192

x Stack
IGMP Snooping Data Driven
Learning Settings (1-960)
Click Apply to implement the changes.
Click the corresponding Modify button in the IGMP Snooping Settings table to open the window, as shown below.
The following parameters may be viewed or modified:
Parameter
VID
VLAN Name
Query Interval (1-65535)
Max Response Time (1-25)
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Enter a value between 1 and 960 for data driven max learning entry.
Figure 3 - 29 IGMP Snooping Settings – Edit window
Description
This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user
wishes to modify the IGMP Snooping Settings for.
This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user
wishes to modify the IGMP Snooping Settings for.
The Query Interval field is used to set the time (in seconds) between transmitting
IGMP queries. Entries between 1 and 65535 seconds are allowed. Default = 125.
This determines the maximum amount of time in seconds allowed before sending an
IGMP response report. The Max Response Time field allows an entry between 1 and
179