Dhcpv6 Server Manual Binding Settings - D-Link xStack DGS-3400 Series Reference Manual

x Stack
Click Apply to implement the changes. To return to the DHCPv6 Server Pool Table window, click the
Pool Table link.
To configure the settings of a pool in the DHCPv6 Server Pool Table, click the corresponding Modify button to reveal the
following window:
The following parameters can be configured or viewed:
Parameter
Pool Name
Begin Network
Address
End Network Address
Domain Name
DNS Server
Preferred Lifetime (60-
4294967295)
Valid Lifetime (60-
4294967295)
Click Apply to implement the changes. To return to the DHCPv6 Server Pool Table window, click the
Pool Table link.

DHCPv6 Server Manual Binding Settings

This window displays the DHCPv6 server manual binding pool information.
To view this window, click Administration > DHCPv6 Server > DHCPv6 Server Manual Binding Settings as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 93 DHCPv6 Pool Table - Edit window
Description
Display the name of the DHCPv6 server pool.
The starting IPv6 network address of the DHCPv6 pool.
The final IPv6 network address of the DHCPv6 pool.
Enter a name that is used by the client as default domain name.
Enter the DNS server IPv6 address for this pool. Users may specify up to two DNS server
addresses.
Enter the amount of time in seconds that the IPv6 address, based on the specified pool,
remains in preferred state.
Enter the amount of time in seconds that the IPv6 address, based on the specified pool,
remains in valid state.
88
Show DHCPv6 Server
Show DHCPv6 Server