Bandwidth Control; Bandwidth Control Settings - D-Link xStack DGS-3400 Series Reference Manual
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
Priority
The priority tags are numbered from 0, the lowest priority, to 7, the highest priority. Insert a priority
value, from 0-7 in the Priority field.
Class ID
Use the pull-down menu to select the Switch's hardware priority queue. The switch has seven
hardware priority queues available.
Click Apply to implement the changes.
Bandwidth Control
The Bandwidth Control section includes Bandwidth Control Settings and Per Queue Bandwidth Control Settings. Bandwidth
Control is to limit a port's bandwidth. The RX and TX rate can be configured separately.
Bandwidth Control Settings
The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected port.
To view this window, click QoS > Bandwidth Control > Bandwidth Control Settings, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
244
Advertisement
Table of Contents
