Wac Authentication State - D-Link xStack DGS-3400 Series Reference Manual

x Stack
The following parameters can be configured:
Parameter
User Name
Old Password
Password
Confirmation
VLAN Name
VID (1-4094)
Click Apply to implement the changes.

WAC Authentication State

This window is used to enable and configure Web-based Access Control Host Table Settings on the Switch.
To view this window, click Security > Web-based Access control (WAC) > WAC Authentication State, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 6 - 37 User Account Modify window
Description
Enter a user name for the new account.
Enter the original password for the user. This field is case-sensitive and must be a
complete alphanumeric string.
Enter the new password for the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirm the new password entered above. Entering a different password here from the one
set above will result in a fail message.
Enter a VLAN to be associated with the WAC account.
Enter the VLAN ID to be associated with the WAC account.
327