x Stack
VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each packet header
and use this as the full or partial criterion for forwarding.
Source MAC
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC
Destination MAC Mask - Enter a MAC address mask for the destination MAC address.
Ethernet type
Selecting this option instructs the Switch to examine the Ethernet type value in each frame's
header.
Click Apply to set this entry in the Switch's memory.
To view the settings of a previously correctly created profile, click View in the CPU Interface Filtering Table window to view
the following window:
Figure 5 - 29 CPU Interface Filtering Entry Display window (Ethernet)
The page shown below is the CPU Interface Filtering Profile Configuration for IP page.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
279