D-Link xStack DGS-3400 Series Reference Manual page 381
Web ui reference guide for layer 2+ managed gigabit ethernet switch
Hide thumbs
Also See for xStack DGS-3400 Series:
- Reference manual (629 pages) ,
- Cli reference manual (540 pages) ,
- Cli manual (463 pages)
Table of Contents
Advertisement
x Stack
To configure the settings by port, click the corresponding Modify button, which will display the following window:
To set the JWAC on individual ports for the Switch, complete the following fields:
Parameter
Unit
Port List
State
Mode
Max Authenticating
Host (0-50)
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 6 - 81 JWAC Port Table Parameter - Add window
Figure 6 - 82 J JWAC Port Table Parameter - Edit window
Description
Choose the Unit ID of the switch in the switch stack to configure.
Lists the range of Ports that will be configured in this window.
This parameter specifies the state of the configured ports.
Use the drop-down menu to select the mode, choose either Port Based or Host Based.
This parameter specifies the maximum number of host process authentication attempts
allowed on each port at the same time.
368
Advertisement
Table of Contents
