802.1 Extension Lldp Port Settings - D-Link xStack DGS-3400 Series Reference Manual

x Stack
RX_Only – The local LLDP agent can only receive LLDP frames.
TX_and_RX – The local LLDP agent can both transmit and receive LLDP frames.
Disabled – The local LLDP agent can neither transmit nor receive LLDP frames.
The default value is TX_and_RX.
Port Description
Used to enable or disable the port description on the Switch.
System Name
Used to enable or disable the system name on the Switch.
System
Used to enable or disable the system description on the Switch.
Description
System
Used to enable or disable the system capabilities on the Switch.
Capabilities
Click Apply to implement the changes.

802.1 Extension LLDP Port Settings

This window is used to configure an individual port or group of ports to exclude one or more of the IEEE 802.1 organizational
port VLAN ID TLV data types from outbound LLDP advertisements.
To view this window, click L2 Features > LLDP > 802.1 Extension LLDP Port Settings, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
214