Extension Lldp Port Settings - D-Link xStack DGS-3400 Series Reference Manual

x Stack
The following parameters can be set:
Parameter Description
Unit
Select the unit to configure.
From / To
Use the pull-down menu to select a range of ports to be configured.
Port VLAN ID
Use the drop-down menu to enable or disable the advertised PVID. This TLV optional datatype
determines whether the IEEE 802.1 organizationally defined port VLAN TLV transmission is
allowed on a given LLDP transmission capable port. The default state is Disabled.
Protocol VLAN ID
Use the drop-down menu to enable or disable the advertise Protocol VLAN ID, VLAN Name, or
All. This TLV optional data type indicates whether the corresponding Local System's port and
protocol VLAN ID instance will be transmitted on the port. If a port is associated with multiple
protocol VLANs, those enabled ports and protocol VLAN IDs will be advertised.
VLAN Name
This function indicates whether the System's VLAN ID, VLAN Name or All will be transmitted on
the port. The default state is Disabled.
Protocol Identify
Use the drop-down menu to enable or disable the advertise Protocol Identity. Select the protocol
you wish to use EAPOL, LACP, GVRP, STP or All. This TLV optional data type indicates whether
the corresponding Local System's Protocol Identity instance will be transmitted on the port. The
Protocol Identity TLV provides a way for stations to advertise protocols that are important to the
operation of the network. Such as Spanning Tree Protocol, the Link Aggregation Control
Protocol, and numerous vendor proprietary variations are responsible for maintaining the
topology and connectivity of the network. If EAPOL, GVRP, STP (including MSTP), and LACP
protocol identity is enabled on this port and it is enabled to be advertised, then this protocol
identity will be advertised.
Click Apply to implement the changes.

802.3 Extension LLDP Port Settings

This window is used to configure an individual port or group of ports to exclude one or more IEEE 802.3 Organizationally
Specific TLV data types from outbound LLDP advertisements.
To view this window, click L2 Features > LLDP > 802.3 Extension LLDP Port Settings, as shown below.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
216