Rcp - D-Link xStack DGS-3400 Series Reference Manual

x Stack
The following parameters can be set:
Parameter
Image
Unit
Action
To boot up a firmware image, select it from the Image pull-down menu, change the Action to Boot and click Apply. To delete a
firmware image, select it from the Image pull-down menu, change the Action field to Delete and click Apply.

RCP

RCP (Remote Copy Protocol) is a UNIX Remote Shell service which allows files to be copied between a server and client. RCP is
an application that operates above the TCP protocols, and uses port number 514 as the TCP destination port.
The RCP application uses client server architecture and the client can be any machine running the RCP client application.
A Switch that supports the RCP client allows users to copy firmware images, configurations and log files between the Switch and
RCP Server.
Switches that do not support a file system should still be able to run an RCP client to copy firmware images, configurations and
logs between the switch and RCP server.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 48 Config Firmware Image window
Description
The Switch allows two firmware images to be stored in its memory and either can be
configured to be the boot up firmware for the Switch. Use the pull-down menu to choose the
image.
Select the switch in the switch stack from which, or to which to upload or download files. Tick
the ALL check box to denote all switches in the switch stack.
Use the pull-down menu to toggle the actions between Delete and Boot.
56