D-Link xStack DGS-3400 Series Reference Manual page 226

x Stack
The following parameters can be set:
Parameter Description
Unit
Select the unit to configure.
From / To
Use the pull-down menu to select a range of ports to be configured.
Notification State
Use the pull-down menu to Enable or Disable the status of the LLDP notification. This function
controls the SNMP trap, however it cannot implement traps on SNMP when the notification is
disabled.
Admin Status
This function controls the local LLDP agent and allows it to send and receive LLDP frames on
the ports. This option contains TX_Only, RX_Only, TX_and_RX or Disabled.
TX_Only – The local LLDP agent can only transmit LLDP frames.
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 3 - 62 Basic LLDP Port Settings window
213